Marine Valves

Design:

• Union / Screwed / Bolted Bonnet
• Outside screw & yoke
• Face to face dimensions according to EN 558 series
• Flanged/ Threaded End Connections
• Rising stem
• Non rising hand wheel

On Request:

• Position Indicator
• Long face to face
• Short Face to face
• Gear, Electrical, Hydraulic actuation
• Class certification
• Stem extension
• Non-standard flange drilling
• ANSI Class 150 through 600

Material of Construction

1. Body: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
2. Ball: Bronze / Brass / Carbon Steel / Stainless steel
3. Stem: Brass / Stainless Steel
4. Seat: PTFE / RPTFE
5. Gland packing: PTFE / Graphite
6. Lever: Aluminium / Cast Iron / Steel

Design:

• Union / Screwed / Bolted Bonnet
• Outside screw & yoke
• Straight & Angle Pattern
• Face to face dimensions according to EN 558 series
• Threaded / Butt Weld / Flanged End Connections
• Rising Hand wheel
• Hand Wheel Operation

On Request:

• Screw- Down Non- Return Disc
• Regulating disc
• Position Indicator
• Bellow Sealed bonnet
• Gear, Electrical, Hydraulic actuator
• Class certification
• Nonstandard flange drilling
• ANSI Class 150 through 600

Material of Construction

1. Body: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
2. Bonnet: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
3. Disc: Bronze / Brass / Carbon Steel / Stainless steel
4. Stem: Brass / Bronze / Stainless Steel
5. Bonnet & Gland packing: Graphite / PTFE
6. Hand wheel: Cast Iron / Steel

Design:

• Screwed / Bolted Bonnet
• Lift / Swing / Dual Plate / Flap type
• Straight & Angle Pattern
• Face to face dimensions according to EN 558 series
• Threaded, Flanged End Connections

On Request:

• Larger sizes
• Long face to face
• Short Face to face
• With counter weight
• Class certification
• Non std flange drilling
• Suitable to Mount between the flanges according to PN10/16, ASME Class 150 & 300.
• ANSI Class 150 through 600

Material of Construction

1. Body: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
2. Cover: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
3. Disc: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
4. Gasket: Graphite / PTFE / NBR
5. Hinge Pin: Suitable as per trim material

Design:

• Floating ball
• 1 piece, 2 piece , 3 piece construction
• Full / Reduced Bore
• Face to face dimensions according to EN 558 series
• Threaded / Welded / Flanged End Connections
• Lever / Gear Operation

On Request:

• Blow-out proof design & Antistatic device
• Locking arrangement
• Stem extension
• Gear, Electrical, Hydraulic actuator
• Class certification
• L – Port & T-Port Ball valve
• Fire safe certified
• Cavity relief Hole in ball
• High pressure ball valve
• Wafer type ball valve
• ANSI Class 150 through 600

Material of Construction

1. Body: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
2. Cover: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
3. Disc: Cast Iron / Ductile Iron / Bronze / Brass / Carbon Steel / Stainless steel
4. Gasket: Graphite / PTFE / NBR
5. Hinge Pin: Suitable as per trim material

Design:

• Centric & double offset design
• Ring, Monoflange, lug & double flanged type
• Bonded, replaceable, PTFE, Non-Replaceable Liner, High performance
• Face to face dimensions according to EN 558 series
• Wafer, lug , flanged End Connections
• Lever, gear operation

On Request:

• Locking arrangement
• Pneumatic, Electrical, Hydraulic actuator
• Remote Operation with control panel
• Class certification
• Stem extension
• Non std flange drilling
• ANSI Class 150 through 600

Material of Construction

1. Body: Cast Iron / Ductile Iron / Bronze / Carbon Steel / Stainless steel
2. Disc: Ductile Iron / Bronze / Al Br / Stainless steel
3. Stem: Brass / Stainless Steel
4. Seat: NBR / EPDM / PTFE
5. Packing: Graphite / PTFE
6. Lever: Cast Iron / Steel